News
Home > News > Content
Automatic Blow Molding Machine Standard Operation
- Feb 06, 2018 -

1, automatic bottle blowing machine repair, press the touch screen fault repair button to ensure safe maintenance. If you need to manually observe the action of each separate cavity, please pay attention to the position of the manipulator. At the same time, be sure to understand the role of separate buttons to ensure that misoperations cause unnecessary trouble.

2, open the high and low pressure air supply switch must be slow action to prevent the source of gas flow too fast dirt blowing into the solenoid valve, while opening the exhaust valve for 30 seconds to ensure clean air.

3, automatic blow molding machine normal operation, any part of the body do not extend into the machine to avoid robotic wounding. If the machine has abnormal sound can be observed after deceleration.