Knowledge
Home > Knowledge > Content
The maintance technology of the bottle blow molding machine
- Apr 20, 2018 -

   Ningbo c-storm plastic machinery co., LTD.  products: 6 cavity automatic bottle blowing machine; Automatic bottle blowing machine with preform hand feeding;4 cavity automatic bottle blowing machine;   blowing machine for the bottle which is for hot filling; water bottle machine ; semi-automatic bottle blowing machine . And the  maintenance are the topics we always want to know,

   Today we will introduce the maintenance and maintenance knowledge to you.

     Maintenance and maintenance of bottle blowing machine:

1.  Feeding place is not added: check several cases.Whether the hopper is out of stock or not, if it is: we need to add material quickly.Not: please check whether the control contactor of the hoist is in the power state.

   If it is an electrical state, check whether the motor is in the power and load state, as it is likely to be a billet.

   The easiest way to get stuck in the belt is to artificially boost it.

   If the control contactor of the lifting machine is not in the current state, please check whether it is not in the same line with the reflector.

2. Feed old card feed tray: this kind of circumstance is the problem that compares a headache, see if the length of billet (the blank) is longer than long cut weight, then this kind of phenomenon is relatively few.

3.  when the bottle is blown, it cannot be removed from the mold.

     Generally speaking, the type of bottle blowing machine is selected according to the product you need.For different quantities of the manufacturer, the general concern is a few lumen, the size of the bottle capacity, and the output per hour. It is critical that you choose the model that fits your needs through your own needs.

   Nowadays, there are quite a few domestic manufacturers of bottle blowing machines.

    On the basis of the right price to choose a brand good manufacturer should also be considered the key, the domestic relatively large bottle blowing machine manufacturers mainly concentrated in zhejiang taizhou. Moreover, many manufacturers have the ability to design and produce independently.

According to the requirements of customers, we can make special machines, and have a large factory to allocate the processing and production of each part.

Plus a good after-sales service system to provide customers with considerate technical support.