1. The bottle blowing machine clamping pressure is not enough;
2. The sealing time of the bottle blowing machine is too early.
3. There is some problem on bottle mould.
4. The neck size of Preform is not suitable for bottle mould neck.
What we can do ?
1.Increase the pressure of clamping,adjust the clamping rod angle ( less than 5 degree);
2.The switch position of clamping stroke is shifted back.
3.Check or repair the mold assembly position,such as the guide column if loose, or if the bottle mould clamping well;
4.Repair the cooperation position of bottle mold tooth.
Related Industry Knowledge
- Automatic bottle blowing machine development trend
- Bottle blowing machine how to choose?
- Automatic bottle blowing machine advantages
- Automatic bottle blowing machine features
- Basic knowledge of blow molding machine science
- Blow molding machine classification
- Hollow blow molding machine / blow molding proc...
- Competition white-hot blow molding machine indu...
- Technical Features Analysis of PP Blow Molding ...
- The working principle of blow molding machine
- About the the transparent of PET bottle
- About the bottle blowing machine , why is the m...
- What are the common problems in bottle blowing ...
- In the process of bottle blowing machine workin...
- The one failure of bottle blowing machine
- Analysis on the development status of Chinese b...
- The maintance technology of the bottle blow mol...
- The second failure of bottle blowing machine
- The bottle blowing machine
- The second failure of PET bottle blowing machine