5L Bottle High Speed Fully Automatic Blow Moulding Machinery

Bottle Blow Molding Machinery, Pet Bottle Blowing Machine, Pet Blow Molding Machinery manufacturer / supplier in China, offering 5L Bottle High Speed Fully Automatic Blow Moulding Machinery, 2L Plastic Pet Bottle Blow Molding Machine, Max2 Liter 4 Cavities Plastic Can Bottle Making Machine and so on.

Send InquiryChat Now
Product Details

Basic Info

  • Model NO.: ECO-5L 1CAV

  • Raw Material: PET

  • Automation: Automatic

  • Certification: CE, ISO9001:2008, QS, UL, GMP

  • Bottle Volume: 5L

  • Output: 700 Bph

  • Weight: 3500kg

  • Color: Yellow abd Gray

  • Light Tubes: 32

  • Transport Package: Nude Package/as Customers Request

  • Origin: Huangyan Zhejaing

  • Type: Stretch Blow Molding Machine

  • Bottle Material: Pet

  • Cavity: 1

  • Driven Type: Servo

  • Dimension(L*W*H): 3.2*1.6*1.9m

  • Voltage: According to Customer Request

  • Trademark: c-storm

  • Specification: CE, ISO

  • HS Code: 8477300000

bottle blowing machine.jpg

Product max volume: 5L
Suitable for blowing bottles between 150ml to 5000ml
Necessary auxiliary devices: High pressure air compressor, High pressure air filter, Low pressure air compresor, low pressure air filter, Chiller, Air Cold Dryer

Automatic PET Bottle Blow Moulding Machine is a high speed linear blow molding machine which is developed and manufactured by our Company using the most advanced bottle blowing technology in the world. Owing to the machine's high degree of automation, high production efficiency, high safety, high stability and reliability, the products made will not be contaminated in any intermediate steps, and it can be matched up directly with the production line of filling and can be widely used in production of mineral water, carbonic acid beverage, juice, tea and heat-resistence bottle product.

Machine Settings of PET Bottle Blow moulding machine
1) PLC colour display: MITSUBISHI(Japan)
2) Pneumatic parts: SMC (Japan)
3) Blowing Value: Parker (USA)
4) Other electric parts : SCHNEIDER (France)

Machine Featuers of PET Bottle Blow moulding machine:
1. Stable performance with advanced PLC.
2. Conveying preforms automatically with conveyor.
3. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared heater.
4. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the ligh and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
5. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
6. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
7. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
8. Strong clamping force with high pressure and double crank links to lock the mold.
9. Two ways of operating: Automatic and manual.
10. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
11. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
12. Contamination is avoided for the bottle body.
13. Ideal effect of the chilling with the chilling system.
14. Easy installation and starting
15. Low rejection rate: Less than 0.2 percent.


Bottle type specification
Max. volume (L)5L
Bottle mouth maximum overall diameter (mm)150mm
Bottle biggest diameter180mm
Bottle maximum height400mm
Power specifications
Light tube quantity32pcs
Light tube power1kw
Maximum heating power32kw
All electric machine installation35kw
Air pressure specification
Work pressure7-9kg/cm2
Low-pressure gas consumption1200Ltr/min
Blow bottle pressure25-35kg/cm2
Higher -pressure gas consumption2000-2500 Ltr/min
Frozen water specification
Work pressure7-8 kg/cm2
Temperature range10
Frozen water flow30Ltr/min
Machine specificationSize of the machine2.3x1.6x2.2

Technology Advantage
l.   Special design,high rigid compound die structure
2.  Wide adaptability, suitable for every type mould thickness
3.  Adjust convenience
4.  No mould rolling out
5.  More energy conservation,no need much air supply
6.  High burnish principal axis, with very precise polishing, light action and low noise.
7. Short mould stroke,quick action
8.  All ZG45 casting, with long timing process,very small transformation,can meet your precise request 100%
9.  Hig dead-weigh, ensure the steady during the opeartion



Hot Tags: 5l bottle high speed fully automatic blow moulding machinery, China, manufacturers, suppliers, factory, pricelist, price, for sale